Why does only one airpod work? The AirPods are great, but sometimes they do not work properly. One of the most common errors that many AirPod users encounter is also one that is relatively easy to fix: One AirPod does not work, so you only hear the sound in one ear.
The problem with AirPods is that they sometimes stop working mysteriously. This is a simple solution to this problem, so you should be able to use your earplugs normally within a few seconds. Whether you have the original AirPods, the AirPods 2, the new AirPods 3 or the noise-canceling AirPods Pro, the steps are the same.
It’s also a good idea to make sure your iPhone’s Bluetooth is turned on if you’re having problems with your AirPods. Swipe down from the top right corner of the screen to start the Control Center. The Bluetooth icon should appear in a blue circle. If not, tap on it.
Plus, you can verify that your iPhone’s software is up to date to alleviate any potential issues you may encounter with your AirPods. It’s generally a good idea to update your AirPods’ software, as it includes security solutions and sometimes new features. Open Settings, tap General, and then select Software Update.
What to do if one of your AirPods does not work
The problem with AirPods is that it can be difficult to pinpoint a single reason why it does not work. There may be a low battery, a software setting or even a dirty speaker mesh in one of the earbuds. Find out what solves your AirPods connection problem by following these troubleshooting tips.
Connect the Bluetooth device
In most cases, it’s smart to start troubleshooting with the easiest solutions first when one of your AirPods does not want to connect. It is possible that a software error can be fixed by simply turning Bluetooth off and on again – when it goes on again, both earbuds will normally connect. Go to the Settings app on your iPhone or iPad. Then tap Bluetooth, swipe the Bluetooth button to the left and then back to the right.
The battery is dead in one AirPod
As you might expect, your AirPods’ batteries drain at different rates, and one of them dies before the other, so only one works. You can check this by placing both AirPods in their drawer and bringing the case very close to your iPhone. Wait a few moments and then open the holder to see the battery level. You can charge your AirPods for 30 to 60 minutes if you need to.
Restart your iPhone
If switching Bluetooth on and off again does not resolve the issue, rebooting the entire device may resolve the issue. Sometimes all that is needed is to flush out the phone’s memory and run software to solve audio problems. For a refresher, here are the steps to restart your iPhone and iPad.
Clean the AirPods
The AirPods may work normally, but you may not be able to hear sound through either of them due to a build-up on the speaker mesh. It does not take much gunk to mute the sound, but it sounds impossible. You can restore the full sound of your AirPods by cleaning them with a lint-free cloth, water and a toothpick.
Check your AirPod audio settings
One thing most people are not aware of: You can set your AirPods to play audio only in one ear, either intentionally or accidentally. There is a trick to control stereo balance in the accessibility settings of your device.
- Select Accessibility in the Settings application.
- Tap Audio / Visual under the Audience section.
- Adjust the balance slider in the Balance section. If it is not in the middle, slide it back to restore balance.
Make sure your phone is up to date
While unlikely, it is always possible that your AirPods may be experiencing a software bug that can be fixed with the latest iOS update. Here’s how to make sure your iPhone is up to date, and here’s how to update your iPad.
Reconnect your AirPods
In the event that none of the possible solutions worked for you, there may be a problem with how your AirPods are connected to your device, so you will need to reset them to factory conditions and reconnect.
- You need to put the AirPods in their suitcase and make sure they are fully charged.
- Open the App settings and turn on Bluetooth.
- Select the AirPods from your list of devices and tap the i on the right.
- Then tap Forget this device and confirm that you want to do so by tapping Forget device in the popup.
- Hold down the button on the back of the AirPods holder for about 15 seconds until the status light flashes white and amber. After releasing the button, connect your AirPods to your iPhone according to the instructions.
Turn to Apple for support
After trying all the troubleshooting tips, it’s likely that the problem is not something you can solve with software or a light cleaning – it could be a hardware problem. In that case, you should contact Apple Support to determine if the AirPods are damaged or need to be replaced.
Does the AirPods 3rd gen and AirPods Pro sound as good as cheap earbuds?
To improve the sound quality of the third-generation AirPods, Apple has increased the sound bar. There are many true wireless earbuds that cost less than $ 100 or even less than $ 50 and offer surprisingly good sound for the price compared to AirPods and AirPods Pro, which are good but not as good as they should be for their price not.
In today’s market, much cheaper earbuds have multiple microphones and some are surprisingly good at making voice calls. Some of the models on this list have surprisingly good noise reduction and compare well with the AirPods, which are known for their strong voice calling capabilities.